I’ve been seeing alot of bugeyes with rust lately so I decided to investigate. I found a decent amount of rust under the seam sealer on the rear passenger side wheel well. I scrubbed it down as best I could and put two coats of por 15 on it. Maybe that will delay the inevitable. […]
I turned my no longer used fog light switch into a test mode switch using a pigtail I got from the junk yard. No more fishing around under the dash for those damn green connectors. I did grab a spare set of test mode connectors (from a Subaru at the junk yard) to replace the […]
Ebay V Limited Knockoff. Only took eight years. haha
Going speed density means the need for accurate IAT sensor readings. The stock location is not the best location so most people move the IAT sensor to the intercooler piping. The GM 3 bar map sensor ended up not working well with the Accessport so I went back to the stock map sensor.
Wired up the DCCD Pro with the STi cluster interface. The DCCD Pro made a huge difference in how the car handles and all for the better. Its amazing. I made a video demonstrating the STi cluster interface.